Magnetically coupled internal gear pumps for ultimate protection against leakage.
As only minimal maintenance is necessary, ED pumps will be a very economical solution compared with traditionally sealed pumps, especially where the application requires the use of double mechanical shaft seals. Often these applications are very arduous resulting in the seals and support system requiring regular attention and/or replacement. Thus, the life cycle costs for ED pumps are generally much lower than for pumps using two seals.
Available with 90° angular configuration.
|Materials:||Cast iron, carbon steel or stainless steel|
|Capacity Range:||Up to 90 m3/h / 400 gpm|
|Speed:||Up to 1750 rpm|
|Differential Pressure:||Up to 16 bar / 250 psi|
|Suction Lift:||Up to 0.5 bar / 15″ Hg vacuum while priming
Up to 0.8 bar / 24″ Hg vacuum while pumping
|Viscosity Range:||Up to 10,000 cSt|
|Temperature:||Up to 250°C / 500° F|