|
Home ::
Products ::
Ingersoll Rand ARO pumps
:: PRO Series - Non metallic pumps |
Ingersoll - Rand pumps
Air-operated diaphragm pumps
PRO Series - Non metallic pumps
|
 |
PD02P 1/4"
Pumps are available in a choice of body
materials including; polypropylene, Conductive
acetal and PVDF (Kynar), with diaphragms
available in Santoprene or Teflon. This
distinctive octagonal shaped body features disc
valves rather than balls allowing the pump to be
mounted in any orientation. Pumps are suitable
for clean liquids with flow rates up to
17.4l/min and operating pressures up to 6.8bar
(100psi).
Note. Conductive acetal pump ATEX
certified.
Contact our office for pump selection,
datasheets and operation and maintenance
instructions. |
|
|
 |
66605 1/2"
Pumps are available in a choice of body
materials including; polypropylene, Conductive
acetal, PVDF (Kynar), with an extensive range of
diaphragms to meet you requirements. An option
is also available with duckbills rather than the
standard ball valves. Pumps are suitable for
liquids with suspended solids up to 2.4mm with
flow rates up to 49 l/min and operating
pressures of 6.8bar (100 psi).
Note. Conductive acetal pump ATEX
certified.
Contact our office for pump selection,
datasheets and operation and maintenance
instructions. |
|
|
 |
6661A 1"
Pumps are available in a choice of body
materials including; polypropylene, PVDF (Kynar),
with an extensive range of diaphragms to meet
you requirements. Aluminium or cast iron centre
sections and air motors. Pumps are suitable for
liquids with suspended solids up to 3.2mm with
flow rates up to 178l/min and operating
pressures of 8.3bar (120psi).
Contact our office for pump selection,
datasheets and operation and maintenance
instructions.
Note. Conductive acetal pump ATEX
certified.Contact our office for pump
selection, datasheets and operation and
maintenance instructions. |
|
|
 |
6661T 1½"
Pumps are available in a choice of body
materials including; polypropylene, PVDF (Kynar),
with an extensive range of diaphragms to meet
you requirements. Aluminium or cast iron centre
sections and air motors. Pumps are suitable for
liquids with suspended solids up to 6.4mm with
flow rates up to 379l/min and operating
pressures of 8.3bar (120psi).
Contact our office for pump selection,
datasheets and operation and maintenance
instructions.
|
|
|
|
|
6662A 2"
Pumps are available in a choice of body
materials including; polypropylene, PVDF (Kynar),
with an extensive range of diaphragms to meet
you requirements. Aluminium or cast iron centre
sections and air motors. Pumps are suitable for
liquids with suspended solids up to 6.4mm with
flow rates up to 548l/min and operating
pressures of 8.3bar (120psi).
Contact our office for pump selection,
datasheets and operation and maintenance
instructions. |
|
|
