|
Home ::
Products ::
Ingersoll Rand ARO pumps
:: PRO Series- Metallic Pumps |
Ingersoll - Rand pumps
Air-operated diaphragm pumps
PRO Series - Metallic pumps
|
 |
PD05P ½”
pumps are available in a choice of body
materials including; aluminium, or stainless
steel with an extensive range of diaphragms to
meet you requirements. Polypropylene centre
sections and air motors. Pumps are suitable for
liquids with suspended solids up to 2.4mm with
flow rates up to 49l/min and operating pressures
of 6.9bar (100psi).
Note. All pumps ATEX certified.
Contact our office for pump selection,
datasheets and operation and maintenance
instructions. |
|
|
 |
66610 1”
Pumps are available in a choice of body
materials including; aluminium, stainless steel,
or cast iron with an extensive range of
diaphragms to meet you requirements. Aluminium
or cast iron centre sections and air motors.
Pumps are suitable for liquids with suspended
solids up to 3.2mm with flow rates up to
132l/min and operating pressures of 8.3bar
(120psi). |
|
|
 |
66615 11/2”
Pumps are available in a choice of body
materials including; aluminium, stainless steel,
or cast iron with an extensive range of
diaphragms to meet you requirements. Aluminium
or cast iron centre sections and air motors.
Pumps are suitable for liquids with suspended
solids up to 6.4mm with flow rates up to
379l/min and operating pressures of 8.3bar
(120psi).
Note. All pumps ATEX certified.
Contact our office for pump selection,
datasheets and operation and maintenance
instructions.
|
|
|
 |
66625 2”
Pumps are available in aluminium, with a range
of diaphragms to meet you requirements.
Aluminium centre sections and air motors. Pumps
are suitable for liquids with suspended solids
up to 6.4mm with flow rates up to 651l/min and
operating pressures of 8.3bar (120psi).
Note. All pumps ATEX certified.
Contact our office for pump selection,
datasheets and operation and maintenance
instructions.
|
|
|
 |
6663X 3"
Pumps are available in aluminium, with a range
of diaphragms to meet you requirements.
Aluminium centre sections and air motors. Pumps
are suitable for liquids with suspended solids
up to 9.5mm with flow rates up to 897l/min and
operating pressures of 8.3bar (120psi).
Note. All pumps ATEX certified.
Contact our office for pump selection,
datasheets and operation and maintenance
instructions. |
|
|
