|
Home ::
Products ::
Ingersoll Rand ARO pumps
:: EXP Series-Non Metallic Pumps |
Ingersoll - Rand pumps
Air-operated diaphragm pumps
EXP Series - Non metallic pumps
|
 |
PD03P 3/8”
Pumps are available in a choice of body
materials including; polypropylene, Conductive
acetal, PVDF (Kynar), with an extensive range of
diaphragms to meet you requirements. Pumps are
suitable for liquids with suspended solids up to
1.6mm with flow rates up to 40.1l/min and
operating pressures of 6.9bar (100psi).
Note. Conductive acetal pump ATEX certified.
Contact our office for pump selection,
datasheets and operation and maintenance
instructions.
|
|
|
 |
PD05P 1/2"
Pumps are available in a choice of body
materials including; polypropylene, Conductive
acetal, PVDF (Kynar), with an extensive range of
diaphragms to meet you requirements. Pumps are
suitable for liquids with suspended solids up to
2.4mm with flow rates up to 54.5l/min and
operating pressures of 6.9bar (100psi).
Note. Conductive acetal pump ATEX certified.
Contact our office for pump selection,
datasheets and operation and maintenance
instructions. |
|
|
 |
PD07P 3/4”
Constructed with polypropylene centre body,
standard stainless steel fasteners, and
polypropylene casing materials with flow rates
up to 56l/min and pressures of 6.9bar (100psi).
Note. Conductive acetal pump ATEX certified.
Contact our office for pump selection,
datasheets and operation and maintenance
instructions.
|
|
|
 |
PD10P 1”
Pumps are available in a choice of body
materials including; polypropylene, Conductive
polypropylene, PVDF (Kynar), with an extensive
range of diaphragms to meet you requirements.
Pumps are available with a number of porting
options, including flanged and screwed
connections. A PE option which is a electronic
interface accessible pump is also an option.
Pumps are suitable for liquids with suspended
solids up to 2.4mm with flow rates up to
200l/min and operating pressures of 8.3bar
(120psi).
Note. Conductive polypropylene pump ATEX
certified.
Contact our office for pump selection,
datasheets and operation and maintenance
instructions.
|
|
|
 |
PD15P 11/2"
Pumps are available in a choice of body
materials including; polypropylene, Conductive
polypropylene, PVDF (Kynar), with an extensive
range of diaphragms to meet you requirements.
Pumps are available with a number of porting
options, all with flanged connections. A PE
option which is a electronic interface
accessible pump is also an option. Pumps are
suitable for liquids with suspended solids up to
6.4mm with flow rates up to 465l/min and
operating pressures of 8.3bar (120psi).
Note. Conductive polypropylene pump ATEX
certified.
Contact our office for pump selection,
datasheets and operation and maintenance
instructions. |
|
|
 |
PD20P 2”
Pumps are available in a choice of body
materials including; polypropylene, Conductive
polypropylene, PVDF (Kynar), with an extensive
range of diaphragms to meet you requirements.
Pumps are available with a number of porting
options, all with flanged connections. A PE
option which is a electronic interface
accessible pump is also an option. Pumps are
suitable for liquids with suspended solids up to
6.4mm with flow rates up to 696l/min and
operating pressures of 8.3bar (120psi).
Note. Conductive polypropylene pump ATEX
certified.
Contact our office for pump selection,
datasheets and operation and maintenance
instructions. |
|
|
