|
Home ::
Products ::
Ingersoll Rand ARO pumps
:: EXP Series-Metallic Pumps |
Ingersoll - Rand pumps
Air-operated diaphragm pumps
EXP Series - Metallic pumps
|
 |
PD05P 1/2"
Pumps are available in a choice of body
materials including; aluminium and stainless
steel with an extensive range of diaphragms to
meet you requirements. Pumps have polypropylene
centre section. Pumps are suitable for liquids
with suspended solids up to 2.4mm with flow
rates up to 45.4l/min and operating pressures of
6.9bar (100psi).
Note. All pumps are ATEX certified.
Contact our office for pump selection,
datasheets and operation and maintenance
instructions.
Link Pdf Datasheet PD05P-XXX-XXX-SE.pdf |
|
|
 |
PD07R 3/4"
Pumps are available in a choice of body
materials including; aluminium and stainless
steel with an extensive range of diaphragms to
meet you requirements. Pumps have polypropylene,
Santoprene, Teflon PTFE or Hytrel centre
sections. Pumps are suitable for liquids with
suspended solids up to 2.4mm with flow rates up
to 51.5l/min and operating pressures of 6.9bar
(100psi).
Note. All pumps are ATEX certified.
Contact our office for pump selection,
datasheets and operation and maintenance
instructions. |
|
|
 |
PD10 1”
Pumps are available in a choice of body
materials including; aluminium, cast iron,
stainless steel and hastelloy C; with an
extensive range of diaphragms to meet you
requirements. Pumps are available with a choice
of aluminium, polypropylene or stainless steel
centre sections and air motors. A PE option
which is a electronic interface accessible pump
is also an option. Pumps are suitable for
liquids with suspended solids up to 3.3mm with
flow rates up to 197l/min and operating
pressures of 8.3bar (120psi).
Note. All pumps are ATEX certified.
Contact our office for pump selection,
datasheets and operation and maintenance
instructions. |
|
|
 |
PD15 11/2"
Pumps are available in a choice of body
materials including; aluminium, cast iron,
stainless steel and hastelloy C; with an
extensive range of diaphragms to meet you
requirements. Pumps are available with a choice
of aluminium, polypropylene or stainless steel
centre sections and air motors. A PE option
which is a electronic interface accessible pump
is also an option. Pumps are suitable for
liquids with suspended solids up to 6.4mm with
flow rates up to 465l/min and operating
pressures of 8.3bar (120psi).
Note. All pumps are ATEX certified.
Contact our office for pump selection,
datasheets and operation and maintenance
instructions. |
|
|
 |
PD20 2”
Pumps are available in a choice of body
materials including; aluminium, cast iron,
stainless steel and hastelloy C; with an
extensive range of diaphragms to meet you
requirements. Pumps are available with a choice
of aluminium, polypropylene with stainless steel
or cast iron air caps and stainless steel centre
sections and air motors. A PE option which is a
electronic interface accessible pump is also an
option. Pumps are suitable for liquids with
suspended solids up to 6.4mm with flow rates up
to 651l/min and operating pressures of 8.3bar
(120psi).
Note. All pumps are ATEX certified.
Contact our office for pump selection,
datasheets and operation and maintenance
instructions. |
 |
PD30 3”
Pumps are available in a choice of body
materials including; aluminium, cast iron,
stainless steel and hastelloy C; with an
extensive range of diaphragms to meet you
requirements. Pumps are available with a choice
of aluminium, polypropylene with stainless steel
or cast iron air caps and stainless steel centre
sections and air motors. A PE option which is an
electronic interface accessible pump is also an
option. Pumps are suitable for liquids with
suspended solids up to 9.5mm with flow rates up
to 1041l/min and operating pressures of 8.3bar
(120psi).
Note. All pumps are ATEX certified.
Contact our office for pump selection,
datasheets and operation and maintenance
instructions. |
|
|
