|
Home ::
Products ::
DESMI Rotan ::
Gear Pumps |
DESMI Rotan - Gear Pumps
|
 |
General purpose pumps – type GP
Pumps in cast iron, for clean, non-abrasive
liquids. The simple and compact construction
makes it a low-cost pump, often used in modified
versions by OEM customers. A close-coupled OEM
model is also available. GP pumps are designed
for use with IEC or NEMA flange motors.
Available with 90° angular configuration.
For pump
selection, datasheets and operation and
maintenance instructions, contact us. |
|
|
 |
Heavy duty pumps– type HD
Pumps in cast iron, for a wide range of viscous,
non-corrosive liquids. HD pumps are specifically
designed for difficult applications and those
involving high viscosity liquids. HD pumps are
known by their sturdy and simple construction.
Available with 90° angular configuration
For pump
selection, datasheets and operation and
maintenance instructions, contact us. |
|
|
 |
Petrochemical duty pumps – type PD
PD pumps are designed for refinery and
petrochemical applications, all
pressure-containing components are carbon steel.
Design pressure according to ANSI 300 Lbs or
Pn40. PD pumps are available to meet API 676
standards with exceptions.
Available with 90° angular configuration
For pump
selection, datasheets and operation and
maintenance instructions, contact us. |
|
|
 |
Chemical duty pumps – type CD
Pumps in stainless steel, designed to handle
corrosive liquids. CD pumps are designed for
handling corrosive liquids, primarily found in
the chemical processing, food and pharmaceutical
industries.
Available with 90° angular configuration.
For pump
selection, datasheets and operation and
maintenance instructions, contact us. |
|
|
 |
Environmental duty magnetic drive pumps –
type ED
Magnetically coupled pumps for ultimate
protection against leakage. As only minimal
maintenance is necessary, ED pumps will be a
very economical solution compared with
traditionally sealed pumps, especially where the
application requires the use of double
mechanical shaft seals. Often these applications
are very arduous resulting in the seals and
support system requiring regular attention
and/or replacement. Thus, the life cycle costs
for ED pumps are generally much lower than for
pumps using two seals.
Available with 90° angular configuration.
For pump
selection, datasheets and operation and
maintenance instructions, contact us. |
|
|
 |
Close-coupled
submersible pumps
Delivery: up to 7,50 m3/h. Head: up to 75,5 m.
Power supply: three and single-phase 50 Hz.Power:
from 0,55 kW up to 1,10 kWTemperature of pumped
liquid: to 400,0 °C.Maximum immersion depth:
20,0 m.
For pump
selection, datasheets and operation and
maintenance instructions, contact us. |
|
|
